FR | EN

Back Special ovens
Special oven nb : K226



Polymerization of composite parts

Modular oven XM60 - 8 modules (480m³)
Temperature: 250 ° C

Inner width: 6400 mm
Interior depth: 17000 mm
internal height: 4400 mm
Power supply: 400V 3P + E 50Hz
Power: 1,856 kVA

- Vertical lift door at the entrance and at the back with 2 door windows L400xH800, motorized by winch + anti-fall system + manual operation option.
- Central vertical lift door motorized by winch + fall prevention system + manual operation option.

2 zones (Zone 1 = modules 1 to 5, Zone 2 = modules 6 to 8).

- Interior in 304 stainless steel
- 4 passages Ø60 + plugs
- Gateways + maintenance scale
- Civil engineering in concrete (HT installation, managed by the customer according to FE recommendations) + 2 treads for AVG + 2 H80 rails 4200 center distance + AVG central guide rail.
- 2x2 FE3000 supervisions (1 supervision PC + 1 redundant PC) + 1 synology with 2 HDD in RAID for storage of databases.
- 1 inverter per system + 1 for synology (5 in total)
- Pumping system 2x 400 m3 / h + main reserve of 1500L + management by the HMI + 2 secondary 500L reserves (1 per zone). busch + FE supply
- Sandwishe Ep 150 panels (10/10 painted steel + Rock wool + Stainless steel 430 10/10) constituting the partitions.
- Electrical cabinets on the right with cabinet air conditioners.
- Speed ​​variator on all brewers

Zone 1 (depth 10.400mm) with :
- 5 modules each comprising 198 kW of heating (6 blocks of 33 kW) + PRS71 1000-6-22 stirrer with WEG motor
- 8x8 Thermocouples J sockets (64 sockets)
- 2 inside stop cables (1 on each side)
- 3 lights / module (24 in total)
- 3x8 controlled vacuum sockets (3x8 vacuum sockets + 3x8 measurement sockets) with JUMO MIDAS S05 relative sensor + solenoid valve + filter + manual valve
- 3x4 hooks for hanging vacuum pipes
- 4x Pressure tap (location to be defined)
- 5 extractors 20,000 m3 / h for cooling and temperature reduction + filter at the air inlets
- 1 access / emergency door on the right near the central guillotine door


Zone 2 (depth 6.400mm) with :
- 3 modules each comprising 198 kW of heating (6 blocks of 33 kW) + PRS71 1000-6-22 type stirrer.
- 4x8 + 1x4 Thermocouples J sockets (36 sockets)
- 2 inside stop cables (1 on each side)
- lighting
- 2x8 vacuum sockets controlled (2x8 sockets for vacuum + 2x8 sockets for measurement) with JUMO MIDAS S05 relative sensor + solenoid valve + filter + manual valve
- hooks for hanging vacuum pipes
- 2x Pressure tap (location to be defined)
- 3 extractor 20,000m3 / h for cooling and temperature reduction + filter at the air inlet
- 1 access / emergency door on the right near the central guillotine door

- Homogeneity of +/- 3 ° C up to 250 ° C according to AMS2750 Type E, CPS8100 Type C and BAC5621.
- No-load lowering speed from 6 ° C / min to 60 ° C.
- Descent speed under load from 3 ° C / min to 60 ° C.
- No load rise speed from 10 ° C / min to 250 ° C
- Speed ​​of load increase from 3 ° C / min up to 250 ° C
- Accuracies of +/- 1.1 ° C according to BAC5621
Follow us on      
Copyright 2021 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.