Universal oven high temperature XUEHT      

XUEHT Range | Applications | Models | Options | Accessories

XUEHT High temperature ovens are suitable for a large number of applications: burning, degassing, pre-heating, hardening, sterilization at high temperature, tests ...

Maximum temperature : 450°C

2 volumes: 112 and 343 liters.

A robust construction
with great performances.

The inner casing is made of stainless steel, resistant to corrosion.
The outer casing is made of electro-galvanized sheet coated with white and blue epoxy paint.

The internal box is separated from the external box by an optimal insulation which reduces heat losses and allows a better quality of heating.
The walls and the door are insulated with 150 mm asbestos free.
You are guaranteed to have:
- optimal functioning,
- low surface temperatures,
- excellent thermal stability.
The insulation is improved by the installation of a special seal allowing the seal between the door and the body of the oven.

The corners of the inner casing are rounded, making it easier to clean the tank.

A entry port centered on the left wall allows the passage of cables or probes. A high-temperature plug makes it possible to close the passage in the event of non-use or to seal the passage after passing the cables through it.

Heating is provided by armored stainless steel resistors, ideally positioned in the air flow, allowing a rapid and uniform rise in temperature.

Forced ventilation for
perfect temperature uniformity !

Ventilation is provided by a motor fan. It accelerates the drying process and homogenizes the heat in the useful volume.
Inside the oven, the air is drawn in by the fan. It is heated by the heating elements and then blown into the useful volume. The hot air is evacuated by an outlet chimney with adjustable shutter at the rear of the oven. Fresh air also enters the volume from the rear.

The air outlet is equipped with an adjustable flap. An air renewal adjustment button opens or closes this shutter. When the latter is closed, the air circulation takes place in a closed circuit in the oven: it is the best method to quickly preheat the oven before introducing objects into it. When the shutter is opened, fresh air is created.

The C3030 temperature profiler

The FRANCE-ETUVES C3030 temperature controller is very accurate and particularly reliable.
Measurement by PT100 or TCJ probe. Electronic PID temperature controller. Accuracy: 0.1°C.
Color display, excellent visibility of temperatures.

Functions :
- display of setpoint and measured temperature
- display (in percentage) of the heating power used
- date and time display
- Possibility of making 1 program with 8 steps: 4 programmable temperature ramps (°C/min) and 4 heating timer (max 9999min)
- delayed start
- repeat loop
- monitoring of your current program (step and remaining time)
- pause or stop the program
- end of cycle buzzer
- fan speed control
- several settings of the protection thermostat (TWW or TWB modes)
- PID adjustment
- possibility of adding a temperature correction at 2 distinct temperatures (offsets)
- automatic fault diagnosis. Display of faults
- RS485 modbus multipoint communication: allows to control several ovens on the same network

Protections for your oven
and your products.

- Automatic heating and ventilation turn off when the door is opened . This function can be deactivated in the parameters of the C3030.

The ovens are equipped with an electronic thermostat with 2 modes (TWW or TWB) according to DIN 12 880.

- In TWW mode, the overheating protection thermostat behaves like an electronic thermostat with automatic reset (protection class 3.1). It measures the temperature in the volume, and control the temperature in the event of failure of the temperature controller. It stops heating until the temperature has dropped below the value of its setting.

- In TWB mode, the overheating protection thermostat behaves like an electronic thermostat with manual reset (protection class 2.0). When the measured temperature exceeds the set value, the heating is switched off. It is only available again if the thermostat is manually reset.

- Setpoint Deviation Temperature (SDT)
The SDT system is a mechanism for monitoring the set temperature within a set tolerance zone. This is a temperature tracking alarm.

With visual and audible alarm.

Note : It's possible to control the oven with a computer through a RS232 cable.

Loading shelves

XUEHT112 and XUEHT343 are supplied with 2 shelves (grids).

Multiple hooking levels are available for easy loading and unloading.
The spacing between the levels is 55 mm.

Each shelf can support up to 30 kg distributed.
The shelf supports are supplied with an anti-tip system.

Shelves supporting a distributed weight of 60 kg are available as accessories.

Follow us on      
Copyright 2021 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.