Ovens for many processes.
Temperature : max. 300°C
The FRANCE ETUVES XU universal ovens are suitable for all applications for drying, heating, heat preservation, sterilization, component aging, curing or any other thermal test in laboratories and in all sectors of industry.
There are 8 standard volumes : 32, 58, 112, 225, 343, 490, 686 and 980 liters.
A robust manufacturing that meets quality requirements.
The outer plates of the oven are made of electro galvanized steel coated with white and blue paints.
The inner casing is made of bright polished stainless steel. Stainless steel is particularly corrosion resistant, allowing you to process higher water content products.
The control panel is located on the top part of the oven for smallest space requirements.
ENTRY PORT 20 mm
An entry port is centered on the left side for passing cables or probes. A silicone cork allows you to block the entry port in case of non-use or to make airtight after passing cables.
The oven is equipped with an internal light activated by a switch located on the control panel.
The rounded corners of the inner casing make easier cleaning operations.
The thermal insulation by asbestos-free glass wool is optimized.
The outer casing is separated from the inner casing. There is no thermal bridge in order to ensure :
- low surface temperatures,
- low power consumption,
- rapid heating up.
Air tightness of the door is ensured by a long-lasting stabilized silicone seal. It is easily removable for an easy and quick cleaning.
AN EFFICIENT HEATING
Heating is ensured by sheathed stainless steel heating elements, ideally positioned in the air flow, allowing homogeneous heating up.
A forced convection for an amazing temperature homogeneity !
Ventilation is provided by one or two fan(s) motor. It speeds up the drying process and homogenizes heating in the working volume.
Inside the oven, air is sucked by the fan (1). It is heated by the heating elements (2), then is blown into the working volume (3).
The hot air goes out through at the back of the oven (4). Fresh air enters the volume near the fan (5).
Adjustable air change
It is possible to create an air change inside the working volume. Thanks to an adjustment button, open more or less the flap of the air outlet located at the backside of the oven. Hot air escapes from the air outlet and is replaced by ambient air.
The C3000 temperature controller : accuracy and reliability.
The C3000 temperature controller developped by FRANCE-ETUVES is a highly accurate and highly reliable microprocessor.
Very efficient and extremely easy to use. Measurement by PT100 sensor. PID electronic regulator. Accuracy: 0.1°C.
- Setpoint display and that measured.
- Delayed Start : 1min to 99h59min.
- Heat ramp.
- Heating timer from 0 to 99h59min.
- Repeat loop.
- Buzzer at the end of a cycle.
- Over temperature alarm.
Protections for your oven and your products.
An adjustable and non-resettable mechanical thermostat (class 3.1 protection) protects the oven/product against overheating. It measures the temperature in the volume, and supports the regulation in case of failure of the temperature controller.
It stops heating until the temperature has dropped below the value of its setting.
With visual and audible alarm.
Note : It's possible to control the oven with a computer through a RS232 cable.
Ovens are delivered with 2 shelves (metal grills).
Many positions are available for convenient loading/unloading. Each shelf can withstand up to 30 kg.
Supports of shelves have an anti-tilting system.
The spacing between the levels is 55mm.
Additional shelves that can withstand up to 60 kg are available as accessories.
FRANCE ETUVES designs, manufactures and markets ovens for the laboratory and industry. Ovens are used for drying, heating, sterilization and hot storage applications. They allow you to maintain a uniform temperature and adapt to all your needs.