FR | EN

Vacuum Oven low vacuum XFE      

XFE Range | Applications | Models | Options | Accessories



Our Vacuum ovens XFL are suitable for drying* of sensitive products, thermal treatments of oxidizable materials, quick drying of powders and granulate... in pharmaceutical, cosmetics, plastics, electronics, chemical, agrifood… laboratories or industries.

* For any drying application, please contact us to explain exactly your need to +33 164213060. We will help you to find the products adapted to your needs.

Max temperature : 200°C

Vacuum range : according to your Vacuum pump.
up to 1 mbar
(absolute pressure)

2 sizes : 20 and 51 liters.



A solid construction
for lasting performance.


Exterior made of steel coated with blue and white epoxy paints
The inner casing is made of corrosion resistant strong thick stainless steel.

THICK INSULATION
No contact between the inner and outer casings for no thermal bridge.
Insulation is made of asbestos-free glass wool : low surface temperature, low electrical consumption, a rapid rise in temperature.

DOOR WITH VIEWING WINDOW
The door is equipped with a thick safety glass.

SEALING
A silicone gasket provides the seal of the door. Closing the door at 2 points.

EASY CLEANING
The rounded corners of the inner casing make easier cleaning operations ; the racks and the seal are easy-to-remove.




An efficient heating.

Heating is ensured by heating elements located on outer faces of the inner casing for the best homogeneity.

The temperature sensor is located inside the oven.


Easy temperature controls.

Vacuum ovens XFE feature a DN16KF passage with a silicone plug. It is possible to introduce sensors for temperature measurements inside the oven.


An easy connection
of your vacuum pump.


Teats allow the pumping of air and vacuum breaking.




Vacuum control valve

A manual valve will allow you to create a vacuum or introduce air inside the oven.

Note : The vacuum level is displayed on the regulator. Display up to 1mbar max.



The C3030 temperature profiler

The FRANCE-ETUVES C3030 temperature controller is very accurate and particularly reliable.
Measurement by PT100 or TCJ probe. Electronic PID temperature controller. Accuracy: 0.1°C.
Color display, excellent visibility of temperatures.

Functions :
- display of setpoint and measured temperature
- display (in percentage) of the heating power used
- date and time display
- vacuum level display
- Possibility of making 1 program with 8 steps: 4 programmable temperature ramps (°C/min) and 4 heating timer (max 9999min)
- delayed start
- repeat loop
- monitoring of your current program (step and remaining time)
- pause or stop the program
- end of cycle buzzer
- several settings of the protection thermostat (TWW or TWB modes)
- PID adjustment
- possibility of adding a temperature correction at 2 distinct temperatures (offsets)
- automatic fault diagnosis. Display of faults
- RS485 modbus multipoint communication: allows to control several ovens on the same network





Protections for your oven
and your products.


- Heating and pumping, automatic stop when the door is opened . This function can be deactivated in the parameters of the C3030.

The ovens are equipped with an electronic thermostat with 2 modes (TWW or TWB) according to DIN 12 880.

- In TWW mode, the overheating protection thermostat behaves like an electronic thermostat with automatic reset (protection class 3.1). It measures the temperature in the volume, and control the temperature in the event of failure of the temperature controller. It stops heating until the temperature has dropped below the value of its setting.

- In TWB mode, the overheating protection thermostat behaves like an electronic thermostat with manual reset (protection class 2.0). When the measured temperature exceeds the set value, the heating is switched off. It is only available again if the thermostat is manually reset.

- Setpoint Deviation Temperature (SDT)
The SDT system is a mechanism for monitoring the set temperature within a set tolerance zone. This is a temperature tracking alarm.

With visual and audible alarm.

Note : It's possible to control the oven with a computer through a RS232 cable.



Loading trays

Vacuum ovens XFE are provided with 1 aluminum tray.



Each tray can hold up to 30 kg distributed.

The racks are easily removable for easy cleaning.



Follow us on      
Copyright 2021 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.