Microbiological Incubator XB      

XB Range | Applications | Models | Options | Accessories

Our incubators are designed to answer to all biological, medical, pharmaceutical, hygiene industry laboratories for microbiological and most standard incubation processes, quality controls, tempering, thermal storage...

Temperature : max 80°C

Accurate and efficient incubators, natural or forced convection !

On models XB032, XB058 and XB112 , it is possible for you to completely stop the ventilation inside the incubator.

A robust manufacturing that meets
quality requirements.

The outer plates of the oven are made of electro galvanized steel coated with white and blue paints.
The inner casing is made of bright polished stainless steel, particularly corrosion resistant. The rounded corners of the inner casing make easier cleaning operations.
The control panel is located on the top part of the oven for smallest space requirements.
Low power consumption.

An entry port is centered on the left side for passing cables or probes. A silicone cork allows you to block the access port in case of non-use or to make airtight after passing cables.

The incubator is equipped with an internal light activated by a switch located on the control panel.

All models in the range are equipped with an inner glass pane to protect your products from the temperature difference when opening the door.

Air tightness of the door is ensured by a long-lasting stabilized silicone seal. It is easily removable for an easy and quick cleaning.

Double convection,
2 choices !

Ventilation is provided by one or two fan(s) motor. It speeds up the drying process and homogenizes heating in the working volume. Inside the oven, air is sucked by the impeller. It is heated by the heating elements, then is blown into the working volume. A speed controller on the control panel allows you to adjust fan speed.

The speed fan controller on XB032, XB058 and XB112 allows you completely stop the ventilation inside the incubator.

It is possible to create an air change inside the working volume. Thanks to an adjustment button, open more or less the flap of the air outlet located at the backside of the oven. Hot air escapes from the air outlet and is replaced by ambient air.

The C3000 temperature controller :
accuracy and reliability.

The C3000 temperature controller developped by FRANCE-ETUVES is a highly accurate and highly reliable microprocessor.
Very efficient and extremely easy to use. Measurement by PT100 sensor. PID electronic regulator. Accuracy: 0.1°C.

Functions :
- Setpoint display and that measured.
- Delayed Start : 1min to 99h59min.
- Heat ramp.
- Heating timer from 0 to 99h59min.
- Repeat loop.
- Buzzer at the end of a cycle.
- Over temperature alarm.

Protections for your incubator
and your products.

An adjustable and non-resettable mechanical thermostat (class 3.1 protection) protects the oven/product against overheating. It measures the temperature in the volume, and supports the regulation in case of failure of the temperature controller.

It stops heating until the temperature has dropped below the value of its setting.
With visual and audible alarm.

Note : It's possible to control the oven with a computer through a RS232 cable.

Loading shelves

Ovens are delivered with 2 shelves (metal grills).

Many positions are available for convenient loading/unloading.
Each shelf can withstand up to 30 kg.
Supports of shelves have an anti-tilting system.
The spacing between the levels is 55mm.

Additional shelves that can withstand up to 60 kg are available as accessories.

Follow us on      
Copyright 2021 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.