20% discount on Universal oven XU until 2018/03/30
Go to our
online shop

High Temperature Oven XPP

XPP Range | Applications | Models | Options | Accessories

XPP High-temperature ovens

XPP High-temperature ovens are used for steel tempering and other heat treatment of materials up to a maximum temperature of 450°C (as a peak).

Advantages :

  • Horizontal ventilation for a homogeneous distribution of hot air,
  • High-quality insulation materials for lower surface temperatures and energy costs,
  • Up to 650°C or 850°C as an option.


There are 6 volumes: 20, 40, 70, 140, 270 and 540 liters.

External sheets are made of structural steel and painted red (RAL3020) and black (RAL9005).

Internal sheets are made of stainless steel.

Insulation is made of compressed fibers inserted into the oven body.

The control panel is on the left side. The electrical box is located at the backside of the oven.

The door is equipped with an easy-to-open handle. Only both biggest models (270L and 540L) are equipped with two adjustable clamps. The hinges are on the right side.

Ventilation / heating

All models have a fan located at the backside.

Ventilation is horizontal: air is blown from the lateral backside on the whole height (for 20L models) or from lateral sides for other models.

Ovens have an air outlet, located on the top side. The air outlets have a manually adjustable flap. Diameters are 51*2 mm for 20L to 140L models and 104*2 mm for bigger models.

Heating is ensured by heating elements located on the lateral sides.


Temperature control is ensured by the easy-to-use HT40AL controller. It allows simple control (control at a constant temperature) or to create simple profiles with 2 ramps and timers.

650°C or 850°C models are equipped with the INDUSTRY profiler allowing you to create up to 30 profiles with 16 steps each ones.

Temperature is measured thanks to a thermocouple type K probe.


The door is equipped with a mechanical detector that cuts off ventilation and heating when the door is open.

The controller is equipped with a safety that cuts off heating when there is an overheating and to indicate it with a LED.

The fan is protected by a circuit breaker.

Standard equipment

All models (except 20L models) are equipped with 2 loading plates. The bottom of all models can receive a load. For 40L to 140Lmodels, plates are fixed on the lateral sides. For bigger models, plates lay on a mobile inner frame.

Options / accessories

Additional plates are available as accessories.
Standard options of the XPP high-temperature ovens are: 650°C as maxi temperature, 850°C as maxi temperature, inert gas port and portable recorder. Consult us for other options.

XPP ovens can be equipped with a movable sub-frame. With the sub-frame, the bottom of the oven is 900mm high.

Contact us at +33 1 64 21 30 60.

  70 years of EXPERIENCE
Unique know-how.
Thousands of satisfied clients.
We design and manufacture the oven for your needs.
Our specialists advise you.
Our technicians install and troubleshoot your equipment.
Follow us on  
FRANCE ETUVES is a French company that designs, manufactures and markets laboratory and industrial ovens.
Universal ovens
Cooled incubators
Glassware drying ovens
Vacuum ovens
Industrial ovens
Modular ovens
High temperature furnaces
Sales General Conditions
Legal notice

T : +33 1 64 21 30 60
F : +33 1 64 21 30 86

65/67 rue Auguste Meunier
77500 Chelles (FRANCE)

Copyright 2016 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.