Laboratory Furnace XKL      

XKL Range | Applications | Models | Options | Accessories

The laboratory furnaces 1200°C are used for a large number of high temperature treatments: burning, degassing, pre-heating, hardening, tempering, annealing of metals, stress relief, stabilization, tests ... in many branches of laboratory and industry.

Performances :

- Temperature range: up to 1200°C
- Electronic PID controller
- Ramping to set up temperature
- Temperature fluctuation: less than ± 1°C


From compact design, Control panels are at the bottom part of the furnaces to minimise their size.
The inner casing is made of ceramic fiber.
The outer casing is made of stainless steel.
The optimized heat insulation is made of ceramic fiber totally asbestos-free, ensuring efficient operation, low external temperature and excellent thermal stability.
In addition to the insulation, double skin design with air gap be- tween the insulated chamber and outer body keeps the outer body at low temperature, especially the door.


The heater surround the chamber to ensure homogenous heating.
No-wear switching (solid state relay) is used for activating and deactivating the heating elements.
The micro switch at door edge cut off heating.

Exhaust air, fresh air supply

A 20 mm diameter exhaust vent is provided at the rear of the furnaces.

Temperature control and safety thermostat

Temperature sensor is a S thermocouple. The temperature is controlled by a precise microprocessor-based controller that provides a high accuracy and prevents the set temperature from being exceeded.
The alarm integrated inside the controller has an adjustable deviation limit, giving a class 3.1 protection. The controller digitally displays the set and actual values of temperature and incorporates a heater indicator lamp. The control panel houses a ON/OFF switch turn the furnace on and off.

Contact us at +33 1 64 21 30 60.
Follow us on      
Copyright 2021 ® FRANCE-ETUVES. All rights reserved. Non-contractual images and photographs.