XBE - France Etuves

Our incubators are designed for all biological, medical and pharmaceutical industries processes. For most standard incubation processes at 37°C, quality controls, tempering, thermal storage... Temperature : max

80°C

The XBE incubators have the FRANCE ETUVES C3030 temperature controller which will allow you to make a temperature program up to 8 segments (4 programmable temperature ramps (°C/min) and 4 heating timer (max 9999min).

Accurate and efficient incubators, natural or forced convection !

On models XBE032, XBE058 and XBE112 , it is possible for you to completely stop the ventilation inside the incubator.

A robust manufacturing that meetsquality requirements.

The outer plates of the oven are made of electro galvanized steel coated with white and blue paints. The inner casing is made of bright polished stainless steel, particularly corrosion resistant. The rounded corners of the inner casing make easier cleaning operations. The control panel is located on the top part of the oven for smallest space requirements. Low power consumption. ENTRY PORT 20 mm An entry port is centered on the left side for passing cables or probes. A silicone cork allows you to block the access port in case of non-use or to make airtight after passing cables. INTERNAL LIGHT XBE Incubators have an interior light point that automatically turns on when the door is opened. INNER DOOR MADE OF TEMPERED SAFETY GLASS All models in the range are equipped with an inner glass pane to protect your products from the temperature difference when opening the door. SEAL DOOR Air tightness of the door is ensured by a long-lasting stabilized silicone seal. It is easily removable for an easy and quick cleaning.

Double convection, 2 choices !

Ventilation is provided by one or two fan motor(s). It speeds up the drying process and homogenizes heating in the working volume. Inside the oven, air is sucked by the impeller. It is heated by the heating elements, then is blown into the working volume. A speed controller on the control panel allows you to adjust fan speed.

It is possible to completely stop ventilation inside the incubator.

ADJUSTABLE AIR CHANGE It is possible to create an air change inside the working volume. Thanks to an adjustment button, open more or less the flap of the air outlet located at the backside of the oven. Hot air escapes from the air outlet and is replaced by ambient air.

The C3030 temperature profiler

The FRANCE-ETUVES C3030 temperature controller is very accurate and particularly reliable. Measurement by PT100 or TCJ probe. Electronic PID temperature controller. Accuracy: 0.1°C. Color display, excellent visibility of temperatures. Functions :

display of setpoint and measured temperature

display (in percentage) of the heating power used

date and time display

Possibility of making 1 program with 8 steps: 4 programmable temperature ramps (°C/min) and 4 heating timer (max 9999min)

delayed start

repeat loop

monitoring of your current program (step and remaining time)

pause or stop the program

end of cycle buzzer

fan speed control

several settings of the protection thermostat (TWW or TWB modes)

PID adjustment

possibility of adding a temperature correction at 2 distinct temperatures (offsets)

automatic fault diagnosis. Display of faults

RS485 modbus multipoint communication: allows to control several ovens on the same network

Protections for your oven and your products.

Automatic heating and ventilation turn off when the door is opened . This function can be deactivated in the parameters of the C3030. The ovens are equipped with an electronic thermostat with 2 modes (TWW or TWB) according to DIN 12 880.

In TWW mode, the overheating protection thermostat behaves like an electronic thermostat with automatic reset (protection class 3.1). It measures the temperature in the volume, and control the temperature in the event of failure of the temperature controller. It stops heating until the temperature has dropped below the value of its setting.

In TWB mode, the overheating protection thermostat behaves like an electronic thermostat with manual reset (protection class 2.0). When the measured temperature exceeds the set value, the heating is switched off. It is only available again if the thermostat is manually reset.

Setpoint Deviation Temperature (SDT) The SDT system is a mechanism for monitoring the set temperature within a set tolerance zone. This is a temperature tracking alarm. With visual and audible alarm. Note : It's possible to control the oven with a computer through a RS232 cable.

Loading shelves

Ovens are delivered with 2 shelves (metal grills). Many positions are available for convenient loading/unloading. Each shelf can withstand up to 30 kg. Supports of shelves have an anti-tilting system. The spacing between the levels is 55mm. Additional shelves that can withstand up to 60 kg are available as accessories.

Incubator 32 Liters XBE032

Model	XBE032
Chamber volume:	32 litres

Performances :
Standard maximum temperature :	80 °C
Optional maximum temperature :	0 °C

Dimensions :
Chamber volume:	32 litres
Interior Dimensions (L x P x H) :	300 x 270 x 400 mm
Exterior Dimensions (L x P x H) :	464 x 566 x 712 mm

Partials product models shleves
Shelves quantity :	2 delivered / 6 maximum
Shelves dimensions :	270 x 240 mm
Max Load per Shelf / Total :	30 / 60 kg

Power & Divers :
Electrical Supply :	230V ~1P 50/60Hz 5A
Standard power 80 °C :	145 Watts
Number of door(s) :	1
Ventilation flow rate :	110 m3/hour
Weight :	39 kg

Incubator XBE058

Model	XBE058
Chamber volume:	58 litres

Performances :
Standard maximum temperature :	80 °C
Optional maximum temperature :	0 °C

Dimensions :
Chamber volume:	58 litres
Interior Dimensions (L x P x H) :	400 x 360 x 400 mm
Exterior Dimensions (L x P x H) :	564 x 656 x 712 mm

Partials product models shleves
Shelves quantity :	2 delivered / 6 maximum
Shelves dimensions :	370 x 330 mm
Max Load per Shelf / Total :	30 / 60 kg

Power & Divers :
Electrical Supply :	230V ~1P 50/60Hz 5A
Standard power 80 °C :	165 Watts
Number of door(s) :	1
Ventilation flow rate :	110 m3/hour
Weight :	50 kg

Incubator XBE112

Model	XBE112
Chamber volume:	112 litres

Performances :
Standard maximum temperature :	80 °C
Optional maximum temperature :	0 °C

Dimensions :
Chamber volume:	112 litres
Interior Dimensions (L x P x H) :	500 x 450 x 500 mm
Exterior Dimensions (L x P x H) :	664 x 746 x 812 mm

Partials product models shleves
Shelves quantity :	2 delivered / 8 maximum
Shelves dimensions :	470 x 420 mm
Max Load per Shelf / Total :	30 / 60 kg

Power & Divers :
Electrical Supply :	230V ~1P 50/60Hz 5A
Standard power 80 °C :	240 Watts
Number of door(s) :	1
Ventilation flow rate :	200 m3/hour
Weight :	65 kg

Range XBE		XBE032	XBE058	XBE112

Performances
Temperature range :	Ambient temperature + 5 °C à 80 °C
Standard maximum temperature :	80 °C
Homogeneity at 37 °C :	± °C	< 0.0	< 1.2	< 1.2

Chamber dimensions
Chamber volume:	dm3	32	58	112
Width :	mm	300	400	500
Depth :	mm	270	360	450
Height :	mm	400	400	500

Exterior Dimensions
Exterior Chamber Volume :	m3	0.19	0.26	0.4
Width :	mm	464	564	664
Depth :	mm	566	656	746
Height :	mm	712	712	812

Shelves:
Delivered / Maximum :		2 / 6	2 / 6	2 / 8
Dimensions L / P :	mm	270 x 240	370 x 330	470 x 420
Maximum weight / Total :	kg	30 / 60	30 / 60	30 / 60

Other informations
Number of door(s) :		1	1	1
Window L / l (option)	mm	130x200	200x200	180x350
Weight :	kg	39	50	65

Electrical data
Standard power 80 °C :	Watts	145	165	240
Electrical Supply :	volts	230V ~1P 50/60Hz 5A	230V ~1P 50/60Hz 5A	230V ~1P 50/60Hz 5A

Nous nous réservons le droit d'apporter toute modification technique sans préavis.

All the options of the range XBE

Reference	Image	Description
OG9006		Door with viewing window You will be able to see and control inside the oven. The surface temperature around the window and the power consumption will be higher. The temperature uniformity will be affected.
OG9008		Digital weekly program timer Set times of operation of the oven for each day of the week. Ventilation is stopped only when the oven temperature has fallen to 80°C to prevent damage to the fans.
OG9030		Factory calibration certificate 1 point 1 temperature Measurement in the center of the working chamber at 105°C, 150°C or 200°C (according to FD X 15-140).
OG9031		Homogeneity control 1 temperature (105,150 or 200°C) Measurement at 9 or 15 points in the working chamber at 105°C, 150°C or 200°C (according to FD X 15-140).
OG9047		Access port diameter 60 mm Centered on the left side. Allows the passage of cables or sensors.
OG9049		Temperature profiler and recorder Creates up to 100 programs with 25 steps each. Recording of measured temperatures. Large graphical display. Real-time monitoring of temperatures. 3 extra channels. With USB and RJ45 plugs.
OG9058		Key lock door
OG9071		Ethernet/RS485 converter Add an Ethernet port to communicate in modbus TCP with temperature controller
OG9073		Ethernet RJ45 communication module Interface connected to the oven controller(C3030, C6000 or C6060). The user can control the controller with a web application included in the interface. It can also send data to a cloud.

All the accessories for the range XBE

Reference	Image	Description
AG9001		Shelf with guide bars Made of chromed steel. Max distributed loading of 30 kg. With 2 anti-tilting guide bars.
AG9002		Reinforced shelf 60 kg with guide bars Made of chromed steel. Max distributed loading of 60 kg. With 2 anti-tilting guide bars.
AG9003		Recovery tray Made of stainless steel. Easy to clean. Their height of 20 mm collects liquids or other substances during your process.
AG9004		Stacking kit Only for XU032 to XU112. To stack 2 ovens same size.
AG9005		Subframe with feet Elevates the oven for a more comfortable loading. Adjustable feet in height.
AG9006		Subframe with castors Elevates the oven for a more comfortable loading. 4 castors, two with brakes.
AG9013		Data logger with 2 channels (software included) Saves the temperatures measured by 2 mobile sensors. Record temperatures measured by 2 mobile sensors. Box with magnetic fixing<br> Dimensions : 93.2 x 65.2 x 30.5 mm Weight: 115 g<br> Display : LCD screen 2 lines \| ABS IP54<br> Communication PC : 1 micro-USB Power supply by battery AA lithium 3.6V<br> Tc entries : female connector micro-USB, thermocouples (K, J, T, N, S)<br> Recording from every 1s to 24h Autonomy: 4 years (for 1 measure every 15 monutes) Software and cable included
AG9014		Portable paperless recorder with graphical screen 4 channels Color graphical display for real monitoring of temperature changes. With USB and RJ45 plugs, and 4 connectors for mobile sensors.
AG9015		Portable paperless graphic recorder with 6 channels Full color screen display. Real monitoring of temperature changes. With USB and RJ45 plugs, and 6 connectors for mobile sensors.
AG9016		Thermocouple probe Length 3 m, with plug
AG9042		Wifi communication module Module to connect to the oven temperature controler (C3030, C6000 or C6060). After configuring the module to access to a Wifi switch, the user can pilot the controler using a Web application included into the module. The module can also send data to a cloud. Adding a SD Card allows the module to keep an history by day and by curing number.